Power sliding door (psd) (if equipped), Opening and closing the psd, Driver controls – FORD 2005 Freestar v.2 User Manual

Page 62

Advertising
background image

Do not operate vehicle with the door in the open position.
Abrupt vehicle acceleration or deceleration could cause the door

to move suddenly and could result in personal injury or damage to the
door.

If the vehicle is parked on a downhill grade, the door could slam
shut and could result in injury or damage to the door. Ensure

that the open door is secure against the stop before allowing
passengers to enter or exit the vehicle.

Power Sliding Door (PSD) (if equipped)
With this option, you can open and close the sliding door(s) with the
following controls inside your vehicle.
• overhead console button

• key fob button

• second row passenger control switch

• inside and outside release handle
Opening and closing the PSD
The PSD will operate without the key in the ignition. The transaxle must
be in PARK to open the PSD, when the key is in the ignition and turned
to the ON position.
The sliding door must be unlocked for the PSD to power open from the
rear trim switches and the inside or outside PSD handles. The fuel filler
door must be closed in order to avoid damage to it when the left sliding
door is opened.

The Power Door Lockout Control is
located in the overhead console.
With the control in the OFF
position, power operation is disabled
from both PSD handles and from
both second row passenger
switches. The overhead console switch and Key fob will operate the
power doors regardless of the position of the lockout switch.

When opening or closing the sliding doors, you should verify they
are free of obstructions and ensure that children and/or pets are

not in the proximity of the sliding door openings. Injury could result if
body parts are caught or pinched in an uncontrolled sliding door.

2005 Freestar (win)
Owners Guide (post-2002-fmt)
USA_English
(fus)

Driver Controls

62

Advertising