Deactivating/activating autolock, Power door unlock/lock procedure, Keyless entry key pad procedure – FORD 2005 Freestyle v.2 User Manual

Page 100: Locks and security

Advertising
background image

• you shift into any gear putting the vehicle in motion, and
• the brake pedal is released and the vehicle attains a speed greater

than 5 mph (8 km/h).

The autolock feature repeats when:
• any door or the liftgate is opened then closed while the ignition is in

the 3 (RUN) position, and

• you put the vehicle in motion by releasing the brake pedal and the

vehicle attains a speed greater than 5 mph (8 km/h).

Deactivating/activating autolock

Your vehicle comes with the autolock feature activated. There are three
methods to enable/disable this feature: One is through your dealer, the
second with a power door unlock/lock sequence, and the third with the
keypad.

Before following the activation or deactivation procedures, make sure
that the anti-theft system is not armed, ignition is off, and all vehicle
doors and liftgate are closed.

Power door unlock/lock procedure

You must complete steps 1-5 within
30 seconds or the procedure will
have to be repeated. If the
procedure needs to be repeated,
you must wait 30 seconds.

1. Turn the ignition to the 3 (RUN) position.

2. Press the power door unlock control three times.

3. Turn the ignition from the 3 (RUN) to the 1 (LOCK) position.

4. Press the power door unlock control three times.

5. Turn the ignition back to the 3 (RUN) position. The horn will chirp.

6. Press the unlock control, then press the lock control. The horn will
chirp once if autolock was deactivated or twice (one short and one long
chirp) if autolock was activated.

7. Turn the ignition to the 1 (LOCK) position. The horn will chirp once
to confirm the procedure is complete.

Keyless entry key pad procedure

1. Turn the ignition to the 1 (LOCK) position.

2. Close all the doors and liftgate.

2005 Freestyle (219)
Owners Guide (post-2002-fmt)
USA_English
(fus)

Locks and Security

100

Advertising