Maintenance and specifications – FORD 2005 GT User Manual

Page 167

Advertising
background image

Use only a DOT 3 brake fluid designed to meet Ford specification
ESA-M6C25–A. Refer to Lubricant specifications in this chapter.

Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes
with running water for 15 minutes. Seek medical attention if

irritation persists. If taken internally, drink water and induce vomiting.
Seek medical attention immediately.

Refer to Removing Luggage Compartment Liner in this chapter to gain
access to the clutch fluid reservoir.

1. Clean the reservoir cap before
removal to prevent dirt and water
from entering the reservoir.

2. Remove cap from reservoir.

3. Add fluid until the level reaches
the step in the reservoir.

4. Reinstall cap onto reservoir.

TRANSAXLE FLUID

Checking and adding transaxle fluid

5. Clean the filler plug.

6. Remove the filler plug and
inspect the fluid level.

7. Fluid level should be at the
bottom of the opening.

8. Add enough fluid through the
filler opening so that the fluid level
is at the bottom of the opening.

9. Install and tighten the fill plug
securely.

Use only fluid that meets Ford specifications. Refer to Lubricant
specifications
in this chapter.

2005 GT (gto)
Owners Guide (post-2002-fmt)
USA_English
(fus)

Maintenance and Specifications

167

Advertising