FORD 2005 Mustang v.1 - Manual (Page 222)

3 Ensure the correct automatic transmission fluid is used. MERCON
௡ and
MERCON
௡ V are not interchangeable. DO NOT mix MERCON௡ and
MERCON
௡ V. Refer to your Scheduled Maintenance Guide to
determine the correct service interval.
4 Approximate dry capacity, includes cooler and tubes. Fluid level should
be checked by a qualified service technician.
5 Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
6 Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification WSS-M2C929-a
(4.0L) or WSS-M2C930-A (4.6L) and the API Certification mark.
LUBRICANT SPECIFICATIONS
Item Ford part
name Ford part
number Ford
specification
Brake fluid Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid PM-1 ESA-M6C25-A
and DOT 3
Door
weatherstrips Silicone
Lubricant XL-6 ESR-M13P4-A
Door latch, hood
latch, auxiliary
hood latch,
striker plates,
seat tracks and
fuel filler door
hinge Multi-Purpose
Grease XG-4 or XL-5 ESR-M1C159-A
or ESB-M1C93-B
Engine coolant Motorcraft
Premium Gold
Engine Coolant
(yellow-colored) VC-7-A (U.S.,
except CA and
OR), VC-7-B
(CA and OR
only) WSS-M97B51–A1
2005 05+ Mustang (197)
Owners Guide (post-2002-fmt)
USA_English (fus)
Maintenance and Specifications
222