Theft indicator, Automatic arming, Automatic disarming – FORD 2005 Taurus v.3 User Manual

Page 82: Replacement keys, Locks and security

Advertising
background image

objects will not cause damage to the coded key, but may cause a
momentary issue if they are too close to the key when starting the
engine. If a problem occurs, turn the ignition off, remove all objects on
the key chain away from the coded key and restart the engine.

Theft indicator

The theft indicator is located in the instrument cluster.
• When the ignition is in the 2 (LOCK) position, the indicator will flash

once every 2 seconds to indicate the SecuriLock

௢ system is

functioning as a theft deterrent.

• When the ignition is in the 4 (ON) position, the indicator will glow for

3 seconds, then turn off to indicate normal system functionality.

If a problem occurs with the SecuriLock

௢ system, the indicator will flash

rapidly or glow steadily when the ignition is in the 4 (ON) position. If
this occurs, the vehicle should be taken to an authorized dealer for
service.

Automatic arming

The vehicle is armed immediately
after switching the ignition to the 3
(OFF) position.

The

THEFT

indicator will flash

every two seconds when the vehicle
is armed.

Automatic disarming

Switching the ignition to the 4 (ON) position with a coded key disarms
the vehicle.
• The

THEFT

indicator will illuminate for three seconds and then go

out.

• If the

THEFT

indicator stays on for an extended period of time or

flashes rapidly, have the system serviced by your dealer.

Replacement keys

If your keys are lost or stolen and you don’t have an extra coded key,
you will need to have your vehicle towed to a dealership. The key codes
need to be erased from your vehicle and new coded keys will need to be
programmed.

3

4

1

2

5

2005 Taurus (tau)
Owners Guide (post-2002-fmt)
USA
(fus)

Locks and Security

82

Advertising
This manual is related to the following products: