FORD 2004 E-450 v.1 - Manual (Page 220)

Fluid Ford Part Name Application Capacity
Fuel tank N/A All regular and
extended length
vans and wagons 132.4L (35.0
gallons)
138 inch
wheelbase (except
E-Super Duty) 140.0L (37.0
gallons)
158 inch
wheelbase (except
E-Super Duty) 140.0L (37.0
gallons)
5
176 inch
wheelbase (except
E-Super Duty) 140.0L (37.0
gallons)
158 inch and 176
inch wheelbase
(E-Super Duty) 208.0L (55 .0
gallons)
Transmission
fluid
6
Motorcraft
MERCON
௡V ATF
Automatic
(4R70/75 E-W) 13.2L (13.9
quarts)
7
Motorcraft MERCON
௡ ATF
Automatic (4R100
except E-450) 16.1L (17.0
quarts)
7
Automatic (4R100
E-450) 16.7L (17.7
quarts)
7
Windshield
washer fluid Motorcraft Premium
Windshield Washer
Concentrate All 4.0L (4.2
quarts)
1 Add the coolant type originally equipped in your vehicle.
2 If your vehicle’s rear axle is filled with a synthetic rear axle lubricant it
is considered lubricated for life. These lubricants do not need to be
checked or changed unless a leak is suspected, service is required or the
axle assembly has been submerged in water. The axle lubricant should
be changed any time the rear axle has been submerged in water.
Fill 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
Add 118 ml (4 oz.) of Additive Friction Modifier XL-3 or equivalent
meeting Ford specification EST-M2C118–A, for complete refill of 8.8 inch
and 9.75 inch Traction-Lok axles.
3 Fill Dana rear axles to 6 mm to 19 mm (1/4 inch to 3/4 inch) below
bottom of fill hole. Fill Visteon axles 6 mm to 14 mm (1/4 inch to 9/16
inch) below bottom of fill hole.
4 Visteon Traction-Lok axles require 118 ml (4 oz.) of Additive Friction
Modifier XL—3 or equivalent meeting Ford specification EST-M2C118–A.
Dana limited-slip axles (E250/350/450/550) require 237ml (8 oz.) of
Additive Friction Modifier C8AZ—19B546–A or equivalent meeting Ford
specification EST-M2C118-A.
2004 Econoline (eco)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
220