Driver controls – FORD 2004 Escape v.2 User Manual

Page 48

Advertising
background image

• Install the transmitter (6) on to storage compartment door (3)

aligning the actuator control (8) with the rubber plunger (1).
Close the storage compartment door (3) to verify proper fit. Do not
force the storage compartment door (3) or you may break the door
latch. If the rubber actuator (1) is the proper length the storage
compartment door will close. Press the storage compartment door (3)
to activate the transmitter (6).

Illuminated visor mirror (if equipped)

Lift the mirror cover to turn on the
visor mirror lamps.

SETTING AUTOLAMP (IF EQUIPPED)

1. Make sure the headlamp control
is in the OFF position. Leaving the
headlamp control in the ON position
will override the autolamp.

2. Turn the ignition to the ON
position or start the vehicle.

3. An illuminated green LED to the
left of the autolamp button
indicates the autolamp is ON. If the
green LED is not illuminated, then
the autolamp is OFF. Press the
autolamp button to activate the
autolamp.

Automatic dimming rear view mirror with Autolamp (if equipped)

The automatic dimming mirror is
equipped with an automatic
dimming feature. This feature will
change from the normal state to the
non-glare “active” state when bright
lights (glare) reach the mirror.
When the mirror detects bright light from behind, it will adjust
automatically to minimize glare.

2004 Escape (204)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driver Controls

48

Advertising