Driver controls – FORD 2004 Explorer v.2 User Manual

Page 75

Advertising
background image

ADVTRAC OFF T/C ON (if equipped). Displayed on 4x4 vehicles only
when 4x4 Low Range is selected. In this mode, the stability enhancement
portion of the AdvanceTrac

௢ is disabled, but the traction enhancement

feature remains enabled. For further information, refer to
AdvanceTrac

stability enhancement system in the Driving chapter.

DOOR AJAR. Displayed when a door or liftgate is not completely
closed.

CHANGE OIL SOON/OIL CHANGE REQUIRED. Displayed when the
engine oil life remaining is 5 percent or less. When oil life left is between
5% and 0%, the CHANGE OIL SOON message will be displayed. When oil
life left reaches 0%, the OIL CHANGE REQUIRED message will be
displayed.

An oil change is required whenever indicated by the message center and
according to the recommended maintenance schedule. USE ONLY
RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change
[approximately 8,000 km (5,000 miles) or 180 days] perform the
following:

1. Select this function from the
SETUP control for current display
mode.

2. Press and release the RESET
control to display “HOLD RESET
TO CONFIRM”.

3. Press and hold the RESET
control to display “OIL LIFE SET
TO 100%”. Your oil life is now reset.

To reset the oil monitoring system to your personalized oil life %:

1. From step 3 above.

2004 Explorer (exp)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driver Controls

75

Advertising