FORD 2004 Explorer v.3 - Manual (Page 278)

3 Add the coolant type originally equipped in your vehicle.
4 Limited Slip differentials must add 118ml (4 oz) of Additive Friction
Modifier XL-7 or equivalent to the rear axle whenever the axle has been
serviced.
5 Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C153–H and the API Certification mark.
LUBRICANT SPECIFICATIONS
Item
Ford Part
Name or
equivalent
Ford Part
Number Ford
Specification
Body hinges,
latches, door
striker plates
and rotors, seat
tracks, fuel filler
door hinge and
spring, hood
latch, auxiliary
latch, seat
tracks
Multi-Purpose
Grease or
Multi-Purpose
Grease Spray
XG–4 or XL–5
ESR-M1C159-A
or
ESB-M1C93–B
Hydraulic brake
fluid and Clutch
Fluid (if
equipped)
Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
PM-1
ESA-M6C25-A,
DOT 3
Driveshaft, slip
spline, universal
joints
Premium Long
Life Grease XG-1-C or
XG-1-K
ESA-M1C75-B
Engine coolant Motorcraft
Premium Gold
Engine Coolant
(yellow-colored) VC-7-A (U.S.,
except CA and
OR), VC-7-B
(CA and OR
only) WSS-
M97B51-A1
REVIEW COPY:
2004 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),
Market: USA English (fus)
Maintenance and Specifications
278