Driver controls – FORD 2004 F-150 v.4 User Manual

Page 59

Advertising
background image

Power Sliding Back Window (if equipped)

To operate the power sliding back window, the ignition switch must be in
the Run or Accessory position.
• Press and hold the bottom part of

the rocker switch to open window
all the way to the full open
position.

• Press and hold the top part of the

rocker switch to close the
window.

All rear seat occupants and/or cargo must be properly restrained
and clear of the back window opening before operating the

power sliding back window.

Accessory delay (if equipped)

With accessory delay, the window switches may be used for up to ten
minutes after the ignition switch is turned to the OFF position or until
any door is opened.

MIRRORS

Automatic dimming rear view mirrors (if equipped)

Your vehicle is equipped with an inside rear view mirror with an
auto-dimming function. The electronic day/night mirror will change from
the normal state to the non-glare state when bright lights (glare) reach
the inside rear view mirror. When the inside rear view mirror detects
bright light from behind the vehicle, the inside rear view mirror will
automatically adjust (darken) to minimize glare.

Do not block the sensor on the backside of the inside rear view mirror
since this may impair proper system performance.

2004 F150 (f12)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driver Controls

59

Advertising