Driving – FORD 2004 Focus v.1 User Manual

Page 115

Advertising
background image

4. Start the vehicle.

If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brakelamps are not
operating properly. Refer to Fuses and relays in the Roadside
emergencies
chapter.

Do not drive your vehicle until you verify that the brakelamps
are working.

Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and

remove the key whenever you leave your vehicle.

If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.

See your dealer or a qualified service technician.

Understanding the gearshift positions of the 4–speed automatic
transaxle

P (Park)

This position locks the transaxle and prevents the front wheels from
turning.

To put your vehicle in gear:
• Start the engine
• Depress the brake pedal
• Move the gearshift lever into the desired gear

2004 Focus (foc)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driving

115

Advertising