Driver controls – FORD 2004 Freestar v.1 User Manual

Page 82

Advertising
background image

CHANGE OIL SOON. Displayed when the engine oil life remaining is 5
percent or less. When oil life left is between 5% and 0%, the CHANGE
OIL SOON message will be displayed. When oil life left reaches 0%, the
OIL CHANGE REQUIRED message will be displayed.

An oil change is required whenever indicated by the message center.
USE ONLY RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change
[approximately 8 000 km (5 000 miles) or 180 days] perform the
following:

1. Press the SETUP control to
access the System Check function.

2. Press and release the RESET
control to display “OIL LIFE XX%
HOLD RESET NEW”.

3. Press and hold the RESET
control for 2 seconds to display “IF
NEW OIL HOLD RESET”.

4. Press and hold the RESET
control to display “OIL LIFE SET
TO 100%”. Your oil life is now reset.

2004 Windstar (win)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driver Controls

82

Advertising