FORD 2004 Mustang v.2 - Manual (Page 49)

Setting speed control
The controls for using
your speed control are
located on the steering
wheel for your
convenience.
1. Press the ON control
and release it.
2. Accelerate to the desired speed.
3. Press the SET
ACCEL control and
release it.
4. Take your foot off
the accelerator pedal.
Note:
• Vehicle speed may vary momentarily when driving
up and down a steep hill.
• If the vehicle speed increases above the set speed
on a downhill, you may want to apply the brakes
to reduce the speed.
• If the vehicle speed decreases more than 16 km/h
(10 mph) below your set speed on an uphill, your
speed control will disengage.
Resuming a set speed
Press the RESUME
control and release it.
This will automatically
return the vehicle to
the previously set
speed. The RESUME
control will not work if
the vehicle speed is not
faster than 48 km/h (30 mph).
OFF
ON
RESUME
SET
ACCEL
COAST
RESUME
SET
ACCEL
COAST
2004 Mustang (mus)
Owners Guide (post-2002-fmt)
USA English (fus)
Driver Controls
49