Locks and security – FORD 2004 Ranger v.3 User Manual

Page 54

Advertising
background image

Your vehicle is equipped with a remote entry system which allows you to:
• unlock the vehicle doors without

a key.

• lock all the vehicle doors without

a key.

• activate the personal alarm.

If there is any potential remote keyless entry problem with your vehicle,
ensure ALL remote entry transmitters are taken to the dealership, to
aid in troubleshooting.

Unlocking the doors

1. Press

and release to unlock the driver’s door. Note: The interior

lamps will illuminate.
2. Press

and release again within three seconds to unlock all the

doors.

Locking the doors
• Press

and release to lock all the doors. The park lamps will flash

once to confirm lock; if any of the doors are not properly closed, the
lamps will not flash.

• If

is pressed a second time within three seconds, the lamps will

flash again and the horn will chirp to confirm all doors are locked and
closed. If either door is ajar the lamps will not flash and the horn will
chirp twice.

Sounding a panic alarm
Press

to activate the alarm. The horn will sound for a maximum of

30 seconds and the parklamps will flash for a maximum of 3 minutes.
Press again or turn the ignition to ON to deactivate, or wait for the alarm
to timeout in 3 minutes.
Note: The panic alarm will only operate when the ignition is in the OFF
or ACC position.
Replacing the battery
The remote entry transmitter uses one coin type three-volt lithium
battery CR2032 or equivalent.

2004 Ranger (ran)
Owners Guide (post-2002-fmt)
USA English
(fus)

Locks and Security

54

Advertising