Lights – FORD 2003 Crown Victoria v.1 User Manual
Page 50
To see a clearer light pattern for
adjusting, you may want to block
the light from one headlamp while
adjusting the other.
5. Locate the vertical adjuster on each
headlamp. Using a 4 mm wrench, turn
the adjuster either clockwise (to
adjust down) or counterclockwise (to
adjust up). The horizontal edge of the
brighter light should touch the
horizontal reference line.
6. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS
NON-ADJUSTABLE.
7. Close the hood and turn off the lamps.
TURN SIGNAL CONTROL
• Push down to activate the left
turn signal.
• Push up to activate the right turn
signal.
• In DRL equipped vehicles, use of
the turn signals will shut off the
highbeams in daytime driving.
The flash rate of the turn signal will speed up considerably if the left or
right turn lamp bulb (front or rear) is burned out.
MAP/COURTESY LAMPS
To turn on the map lamps, press the
control next to each lamp.
Lights
50