Lights – FORD 2003 Crown Victoria v.4 User Manual

Page 54

Advertising
background image

HEADLAMP CONTROL

Turns the lamps off.

Turns on the parking

lamps, instrument panel lamps,
license plate lamps and tail lamps.

Turns the headlamps on.

Autolamp control

The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.

The autolamp system also keeps the
lights on for a predetermined period
of time after the ignition switch is
turned to OFF.
• To turn autolamps on, rotate the

control counterclockwise to the
next position from OFF.

• To turn autolamps off, rotate the control clockwise past OFF to the

parking lamp position

, then back to OFF.

The headlamps will also turn on when the windshield wipers are
activated, after a 10–20 second delay.
Daytime running lamps (DRL) (if equipped)
Turns the highbeam headlamps on with a reduced output. To activate:
• the key must be in the ON position,

• the parking brake released, and

• the headlamp control is in the OFF or Parking lamps position.

Always remember to turn on your headlamps at dusk or during
inclement weather. The Daytime Running Light (DRL) System

does not activate your tail lamps and generally may not provide
adequate lighting during these conditions. Failure to activate your
headlamps under these conditions may result in a collision.

2003 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA English
(fus)

Lights

Lights

54

Advertising