Lights – FORD 2003 E-550 v.1 User Manual

Page 58

Advertising
background image

3. Remove the four headlamp bulb
retaining screws and the retaining
ring.

4. Remove the headlamp.

5. Disconnect the electrical
connector from the bulb and remove
the bulb.

To install the new bulb, follow the removal procedures in reverse order.

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control is in the OFF position and then open
the hood.

2. Remove two screws and pull lamp assembly away from the vehicle.

3. Rotate the bulb socket
counterclockwise and remove.

4. Carefully pull the bulb straight
out of the socket.

To complete installation, follow the
removal procedures in reverse order.

Replacing roof marker bulbs

1. Remove the screw and lens from
the lamp assembly.

2. Carefully pull the bulb straight
out of the socket and push in the
new bulb.

3. Install lens on lamp assembly with
screw.

Lights

58

Advertising
This manual is related to the following products: