Driver controls – FORD 2003 Escape v.3 User Manual

Page 48

Advertising
background image

• Install the transmitter (6) on to storage compartment door (3)

aligning the actuator control (8) with the rubber plunger (1). Close
the storage compartment door (3) to verify proper fit. Do not force
the storage compartment door (3) or you may break the door latch. If
the rubber actuator (1) is the proper length the storage compartment
door will close. Press the storage compartment door (3) to activate
the transmitter (6).

Illuminated visor mirror (if equipped)

Lift the mirror cover to turn on the
visor mirror lamps.

SETTING AUTOLAMP (IF EQUIPPED)

1. Make sure the headlamp control
is in the OFF position. Leaving the
headlamp control in the ON position
will override the autolamp.

2. Turn the ignition to the ON
position or start the vehicle.

3. An illuminated green LED to the
left of the autolamp button indicates
the autolamp is ON. If the green
LED is not illuminated, then the
autolamp is OFF. Press the
autolamp button to activate the
autolamp.

Automatic dimming rear view mirror with Autolamp (if equipped)

The automatic dimming mirror is
equipped with an automatic
dimming feature. This feature will
change from the normal state to the
non-glare “active” state when bright
lights (glare) reach the mirror.

Driver Controls

48

Advertising