Locks and security – FORD 2003 F-150 v.1 User Manual

Page 87

Advertising
background image

• When the ignition is in the OFF position, the indicator will flash once

every 2 seconds to indicate the SecuriLock

௢ system is functioning as

a theft deterrent.

• When the ignition is in the RUN position, the indicator will glow for 3

seconds to indicate normal system functionality.

If a problem occurs with the SecuriLock

௢ system, the indicator will flash

rapidly or glow steadily when the ignition is in the RUN position. If this
occurs, the vehicle should be taken to an authorized dealer for service.
Automatic arming

The vehicle is armed immediately
after switching the ignition to the 3
(OFF) position.

The

THEFT

indicator will flash

every two seconds when the vehicle
is armed.

Automatic disarming
Switching the ignition to the 4 (ON) position with a coded key disarms
the vehicle.
• The

THEFT

indicator will illuminate for three seconds and then go

out.

• If the

THEFT

indicator stays on for an extended period of time or

flashes rapidly, have the system serviced by your dealer.

Replacement keys
If your keys are lost or stolen and you don’t have an extra coded key,
you will need to have your vehicle towed to a dealership. The key codes
need to be erased from your vehicle and new coded keys and key codes
will need to be programmed.
Replacing coded keys can be very costly. Store an extra programmed key
away from the vehicle in a safe place to help prevent any
inconveniences. Please visit an authorized dealer to purchase additional
spare or replacement keys.
Programming spare keys
You can program your own coded keys to your vehicle. Please read and
understand the entire procedure before you begin.

3

2

1

5

4

Locks and Security

87

Advertising