Driving – FORD 2003 F-550 v.5 User Manual

Page 125

Advertising
background image

To start the vehicle:

1. Make sure the parking brake is fully set.

2. Press the clutch pedal to the floor, then put the gearshift lever in the
neutral position.

3. Start the engine, then press the brake pedal and release the parking
brake.

4. Move the gearshift lever to the desired gear, then slowly release the
clutch pedal while slowly pressing on the accelerator.

During each shift, the clutch pedal must be fully depressed to the floor.
Failure to fully depress the clutch pedal to the floor may cause increased
shift efforts and prematurely wear components in the transmission. Make
sure the floor mat is properly positioned so it doesn’t interfere with the
full extension of the clutch pedal.

Do not drive with your foot resting on the clutch pedal or use the clutch
pedal to hold your vehicle at a standstill while waiting on a hill. These
actions will reduce the life of the clutch.

Recommended shift speeds

Upshifts when accelerating (recommended for best fuel

economy)

6-speed transmission

Shift from:

Transfer case position

1

(if equipped)

2H or 4H

4L

LO-1

8 km/h (5 mph)

3 km/h (2 mph)

1-2

16 km/h (10 mph)

6 km/h (4 mph)

2-3

32 km/h (20 mph)

13 km/h (8 mph)

3-4

48 km/h (30 mph)

19 km/h (12 mph)

4

-

D

(Overdrive)

64 km/h (40 mph)

24 km/h (15 mph)

2003 F250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA English
(fus)

Driving

125

Advertising
This manual is related to the following products: