FORD 2003 Mustang v.2 - Manual (Page 31)

MANUAL HEATING AND AIR CONDITIONING
SYSTEM
1. Fan speed
adjustment: Controls
the volume of air
circulated in the
vehicle.
2. Temperature selection: Controls the
temperature of the airflow in the vehicle.
3. Air flow selections: Controls the direction of
the airflow in the vehicle. See the following for a
brief description on each control.
MAX A/C: Uses recirculated air through the
instrument panel registers to cool the vehicle. This
mode is more noisy than A/C, but is more
economical and efficient. May reduce undesirable
odors from entering the vehicle.
A/C: Uses outside air to cool the vehicle. Air flows
from the instrument panel register vents only.
: Distributes outside air through the instrument
panel vents.
O (OFF): Outside air is shut out and the fan will
not operate.
: Distributes outside air through the floor vents.
: Distributes outside air through the windshield
defroster vents and floor vents.
: Distributes outside air through the windshield
defroster vents.
OPERATING TIPS
• To reduce fog build up on the windshield during
humid weather, place the air flow selector in
the
position.
• To reduce humidity build up inside the vehicle:
during cold weather, do not drive with the air
flow selector in the OFF or MAX A/C position.
during warm weather, do not drive with the air
flow selector in the OFF position.
Climate Controls
31