FORD 2003 Mustang v.3 - Manual (Page 193)

Checking and adding manual transmission fluid
(if equipped)
1. Clean the filler plug.
2. Remove the filler
plug and inspect the
fluid level.
3. Note: There are two different manual
transmissions used in this vehicle and they have
different fluid levels. For vehicles equipped with a
V6 engine and Cobra the correct manual
transmission fill level is at the lower edge of the
filler hole. For vehicles equipped with a V8 engine
(except Cobra) the correct manual transmission fill
level is 1.3 cm (1/2 inch) below the edge of the filler
hole.
• Fill level for V6 and
Cobra
• Fill level for V8 (except Cobra)
4. Add enough fluid
through the filler
opening to bring the
fluid up to the
recommended levels.
5. Install and tighten
the fill plug securely.
Maintenance and Specifications
193