FORD 2003 Mustang v.4 - Manual (Page 204)

Item Ford part name Ford part
number Ford
specification
4.6L Manual
transmission
fluid Motorcraft
MERCON
௡ ATF
XT-2–QM MERCON ௡
Disc brake
caliper rails Motorcraft
Silicone Brake
Caliper Grease
and Dielectric
Compound XG-3 ESE-M1C171-A
Windshield
washer fluid Motorcraft
Premium
Windshield
Washer
Concentrate ZC-32–A WSB-M8B16–A2
1 Add 118 ml (4 oz.) of Additive Friction Modifier
XL-3 or equivalent meeting Ford specification
EST-M2C118-A for complete refill of Traction-Lok
axles.
Ford design rear axles contain a synthetic lubricant
that does not require changing unless the axle has
been submerged in water.
2 Ensure the correct automatic transmission fluid is
used. Transmission fluid requirements are indicated
on the dipstick or on the dipstick handle. MERCON
௡
and MERCON
௡ V are not interchangeable. DO NOT
mix MERCON
௡ and MERCON௡ V. Refer to your
scheduled maintenance guide to determine the
correct service interval.
ENGINE DATA
Engine 3.8L OHV V6
engine 4.6L SOHC V8
engine 4.6L 4v V8
engine (Mach
1)
Cubic inches 232 281 281
Required fuel 87 octane 87 octane 91 Octane
Firing order 1-4-2-5-3-6 1-3-7-2-6-5-4-8 1-3-7-2-6-5-4-8
Spark plug gap 1.3-1.4 mm
(0.052-00.056
inch) 1.3-1.4 mm
(0.052-00.056
inch) 1.3-1.4 mm
(0.052-00.056
inch)
Ignition system EDIS Coil on plug Coil on plug
Compression
ratio 9.4:1 9.4:1 10.0:1
Maintenance and Specifications
204