Locks and security – FORD 2003 Taurus v.1 User Manual

Page 70

Advertising
background image

Autolock (if equipped)

This feature automatically locks all vehicle doors when the following
conditions are met:
• all the doors are closed,
• the engine is running, and
• you shift into gear, putting the vehicle in motion.
Relock

The autolock feature repeats when the following conditions are met:
• any door, except the driver’s door, is opened then closed while the

engine is running, and

• you put the vehicle in motion.
To deactivate/reactivate the autolock feature using the power door
unlock control

You must complete steps 1-7 within 30 seconds or the procedure will
have to be repeated. If the procedure needs to be repeated, you must
wait 30 seconds.

1. Turn the ignition key to RUN.

2. Press the power door unlock control three times.

3. Turn the ignition key from RUN to OFF.

4. Press the power door unlock control three times.

5. Turn the ignition back to RUN. The horn will chirp.

6. Press the unlock control, then press the lock control. The horn will
chirp once if autolock was deactivated or twice (one short and one long
chirp) if autolock was activated.

7. Turn the ignition to OFF. The horn will chirp once to confirm the
procedure is complete.

Pressing the power door unlock control again will toggle the
Autolock/Relock states.

Turn ignition to OFF to exit programming.

Locks and Security

70

Advertising