FORD 2003 Taurus v.2 - Manual (Page 68)

• The factory set code will work even if you have set your own personal
code.
• If you set a second personal code it will erase your first personal code.
Erasing personal code
1. Enter the factory set 5–digit code.
2. Press and hold the 1
• 2 for two seconds and release; this must be
done within five seconds of completing step 1.
3. Press and hold the 1
• 2 for two seconds to erase the customer
programmed code; this must be done within five seconds of completing
step 2.
Your personal code is now erased and only the factory set 5–digit code
will work.
Unlocking and locking the doors using keyless entry
To unlock the driver’s door, enter the factory set 5-digit code or your
personal code. Each number must be pressed within five seconds of each
other. The interior lamps will illuminate.
To unlock all doors and the liftgate (wagon), press the 3
• 4
control within five seconds.
To unlock the trunk or liftgate (wagon), press the 5
• 6 control
within five seconds.
To lock all doors, press the 7
• 8 and the 9 • 0 at the same time. You
do not need to enter the keypad code first.
Autolock (if equipped)
This feature automatically locks all vehicle doors when the following
conditions are met:
• all the doors are closed,
• the engine is running, and
• you shift into gear, putting the vehicle in motion.
Relock
The autolock feature repeats when the following conditions are met:
• any door, except the driver’s door, is opened then closed while the
engine is running, and
• you put the vehicle in motion.
Locks and Security
68