Speed control, Instrument cluster – FORD 2002 Crown Victoria v.2 User Manual

Page 15

Advertising

Turn signals

Illuminates when the turn signals or
the hazard lights are turned on. If
the lights stay on continuously or
flash faster, check for a burned-out bulb.

High beams

Illuminates when the high beam
headlamps are turned on.

Message center indicator lights (if equipped)

Speed control

This light comes on when either the
SET/ACCEL or RESUME controls
are pressed. It turns off when the
speed control OFF control is pressed, the brake is applied or the ignition
is turned to the OFF position.

Door ajar

Illuminates when one of the doors is
not completely shut and the ignition
is turned to ON. With the ignition
ON, this light will flash six times (if
a door is open). With the ignition in
RUN position, a tone will sound for
one second (if a door is open).

Low washer fluid

Momentarily illuminates when the
ignition is turned to ON and will
stay on when the windshield washer
fluid is low.

SPEED CONTROL

CHECK

TRUNK AJAR

LTR/100 km

AIR SUSPENSION

OVERDRIVE OFF

DOOR

AJAR

LOW
WASHER
FLUID

MILES

/GAL