Maintenance and specifications – FORD 2002 Escape v.2 User Manual

Page 256

Advertising
background image

Checking and adding manual transmission fluid (if equipped)

1. Clean the filler plug.

2. Remove the filler plug and
inspect the fluid level.

3. Fluid level should be at bottom of
the opening.

4. Add enough fluid through the filler opening so that the fluid level is at
the bottom of the opening.

5. Install and tighten the fill plug securely.

Use only fluid that meets Ford specifications. Refer to the Refill
capacities
in this chapter.

CLUTCH FLUID (IF EQUIPPED)

The clutch master cylinder and
brake master cylinder are part of
the same system; both are refillable
through the brake master cylinder
with brake fluid. For more
information on brake fluid
maintenance, refer to Brake fluid in
this chapter.

Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes
with running water for 15 minutes. Seek medical if irritation

persists. If taken internally, drink water and induce vomiting. Seek
medical attention immediately.

AIR FILTER MAINTENANCE

Refer to the scheduled maintenance guide for the appropriate intervals
for changing the air filter element.

Maintenance and Specifications

256

Advertising