FORD 2002 Explorer v.3 - Manual (Page 130)

Smart unlock
This feature prevents the driver’s from locking while the key is in the
ignition. This feature will unlock only the driver’s door if the key is in the
ignition cylinder, the driver’s door is ajar and all doors are locked using
the interior trim switch. If these conditions are met, the entire vehicle
will lock and the driver’s door will unlock within 1 second.
PERIMETER ALARM SYSTEM (IF EQUIPPED)
The perimeter anti-theft system will help prevent your vehicle from
unauthorized entry.
If there is any potential perimeter anti-theft problem with your vehicle,
ensure ALL key fobs (remote entry transmitters) are brought to the
dealership, to aid in troubleshooting.
Power door lock disable feature
This feature disables the power door locks and liftgate power door lock
control switches if all doors are closed and the perimeter alarm becomes
armed.
Once the locks are disabled, they only become active when the perimeter
alarm is disarmed or a door, liftgate, liftgate window or hood is open.
Deactivating/activating power door lock disable feature
1. Steps 2 through 4 should be
completed within 30 seconds.
2. Turn the ignition key to ON, then
press the UNLOCK button 3 times.
3. Turn the ignition key to OFF,
then press the UNLOCK button 3
times.
4. Turn the ignition key to ON, horn will chirp once to confirm
programming mode is entered.
5. Within 5 seconds of step 4, press the LOCK button 2 times to change
state.
6. The user should receive 2 horn chirps to indicate the system has been
disabled, or 2 horn chirps followed by a honk to indicate the system has
been enabled.
7. Turn ignition to OFF to exit programming. A horn chirp will follow if
the state has been changed.
Controls and features
130