Contemporary Research IP-HDVR - Manual (Page 23)

HDV-RC IR Remote
The HD-RC IR Remote included with the IP-HDVR can be used to setup the tuner and for daily operation. All
of the functions on the remote have equivalent commands in RS-232, Ethernet, and Wired IR formats. In
addition, the IP-HDVR front panel buttons can perform Power, Channel, Volume, and Menu control.
Power
Turns tuner on and off. Discrete on and off IR commands are
available as well.
Volume Control
Use the Vol+, Vol- and Mute buttons
Channel Selection
The key change in digital tuning is the need to add a dash (-) and
number after the traditional channel number. Analog channels are
accessed using XX-0, digital channels using XX-1 (or -2, -3, etc).
Ch+, Ch- and PrevCh can be used to access and recall channels.
The Surf button in the Menu section can step through a list of
favorite channels.
Menu Operation
Press Menu to access the on-screen menus.
Use the directional arrows, Surf, Select and Exit to navigate the
menus. The ~ button in the center of the directional arrows is the
same function as Select.
Special Functions
• CC steps through available closed-captioning options
• Audio selects Mono, Stereo, SAP analog audio output modes
• Signal displays an on-screen signal strength meter
• Ratio steps through aspect ratios, options depend on
channel and output types
Guides
• Info launches on-screen information window
• Station opens up the Station Guide
• Date selects the Date field in Guides
• Pgm displays the Program Guide
Contemporary Research 23 IP-HDVR HD Tuner-DVR