FORD 2002 Explorer Sport Trac v.2 - Manual (Page 67)

• the ignition key is in the ON position,
• the gearshift lever is shifted into R reverse or a forward gear, and
• the brake pedal is released.
This feature will also automatically relock all the doors when:
• the ignition is running and any door is opened then closed, and
• you put the vehicle in motion by releasing the brake pedal.
To deactivate/reactivate the autolock feature using the keypad
Your vehicle comes with the autolock feature activated. To
deactivate/reactivate this feature:
1. Turn the ignition to the OFF position.
2. Close all the doors.
3. Enter the 5-digit entry code.
4. Press and hold the 3
• 4. While holding the 3 • 4 press the 7 • 8.
5. Release the 3
• 4.
6. Release the 7
• 8.
The horn will chirp once when the system has been successfully
deactivated.
The horn will chirp twice (one short and one long chirp) when the
system has been successfully reactivated.
SECURILOCK
ி
PASSIVE ANTI-THEFT SYSTEM
This system prevents the engine from being started unless a key
programmed to you vehicle is used. The use of the wrong type of
coded key may lead to a “no-start” condition.
If an unprogrammed key is used in the ignition it will cause a “no-start”
condition.
Your vehicle comes with two coded
keys; additional coded keys may be
purchased from your dealer. The
dealer can program your spare keys
to your vehicle or you can program
the keys yourself. Refer to
Programming spare keys for
instructions on how to program the
coded key.
Note: Coded keys are not compatible with non-Ford aftermarket remote
starting systems. Use of these systems may result in vehicle starting
problems and loss of security protection.
Locks and Security
67