Maintenance and specifications – FORD 2002 F-550 v.3 User Manual

Page 278

Advertising
background image

Item

Ford part
name or
equivalent

Ford part
number

Ford
specification

Manual
transmission
(6-speed)

Motorcraft
MERCON

௡ ATF

2

XT-2-QDX

MERCON

Automatic
transmission

Motorcraft
MERCON

௡ ATF

2

XT-2-QDX

MERCON

Windshield
washer fluid

Ultra-clear
Windshield
Washer
Concentrate

C9AZ-19550-AC

ESR-M17P5-A

1

Add 236 ml (8 oz.) of Additive Friction Modifier C8AZ-19B546-A or

equivalent meeting Ford specification EST-M2C118-A for complete refill
of Traction-Lok axles. Ford design rear axles contain a synthetic
lubricant that does not require changing unless the axle has been
submerged in water. Dana rear axles also contain a synthetic lubricant
but do require a change. Refer to your “Service Guide” for change
intervals on Dana rear axles.

2

Ensure the correct automatic transmission fluid is used. Transmission

fluid requirements are indicated on the dipstick or on the dipstick
handle. Check the container to verify the fluid being added is of the
correct type. Refer to your scheduled maintenance guide to determine
the correct service interval.

Some transmission fluids may be labeled as dual usage, such as
MERCON

௡ and MERCON௡ V. These dual usage fluids are not to be used

in an automatic transmission that requires use of the MERCON

௡ type

fluid. However, these dual usage fluids may be used in transmissions that
require the MERCON

௡ V type fluid.

MERCON

and MERCONV type fluids are not interchangeable.

DO NOT mix MERCON

and MERCONV. Use of a transmission

fluid that indicates dual usage (MERCON

and MERCONV) in

an automatic transmission application requiring MERCON

may

cause transmission damage. Use of any fluid other than the
recommended fluid may cause transmission damage.

Maintenance and Specifications

278

Advertising
This manual is related to the following products: