FORD 2002 Taurus v.2 - Manual (Page 44)

Turning the EATC on
Press AUTO, any of the override controls or the fan speed control. The
EATC will only operate when the vehicle is running.
Turning the EATC system off
Press OFF. The outside temperature
function will continue to operate
until the ignition is turned off.
Automatic operation
Press AUTO and select the desired temperature. The selected
temperature and the word AUTO will appear in the display window. The
EATC system will either heat or cool to achieve the selected
temperature. The system will automatically determine fan speed, airflow
location and if outside air or recirculated air is required. Fan speed
remains automatic unless the fan speed control is pressed or the steering
wheel fan speed control (if equipped) is pressed.
When in AUTO and weather conditions require heat, air will be sent to
the floor. However, if the engine is not warm enough to provide heat, the
fan will be at a low speed and the air will be directed to the windshield.
In approximately 3
1 ⁄
2
minutes or less, the fan speed will start to increase
and the airflow location will change to the floor area.
F R
AUTO TEMP
OFF TEMP
MAX
A/C
OUTSIDE
AUTO TEMP
OFF
MAX
A/C
TEMP
OUTSIDE
Climate Controls
44