Controls and features – FORD 2001 F-550 v.2 User Manual

Page 30

Advertising
background image

Temperature control

Controls the temperature of the
airflow inside the vehicle. On
heater-only systems, the air cannot
be cooled below the outside
temperature.

Mode selector control

Controls the direction of the airflow
to the inside of the vehicle.

(Panel) -Distributes outside air through the instrument panel

registers.

• OFF-Outside air is shut out and the fan will not operate. For short

periods of time only, use this mode to prevent undesirable odors from
entering the vehicle.

(Panel and floor) -Distributes outside air through the instrument

panel registers and the floor ducts.

(Floor) -Allows for maximum heating. Distributes outside air

through the floor ducts.

(Floor and defrost) -Distributes outside air through the floor

ducts and the windshield defroster ducts.

(Defrost) -Distributes outside air through the windshield

defroster ducts. It can be used to clear ice or fog from the windshield.

Operating tips
• In humid weather conditions, place the climate control system in

DEF before driving. This will reduce fogging on your windshield. Once
the windshield has been cleared, operate the climate control system as
desired.

• To reduce humidity buildup inside the vehicle in cold weather

conditions, don’t drive with the climate control system in the OFF
position.

• Under normal weather conditions, your vehicle’s climate control

system should be left in any position other than MAX A/C or OFF
when the vehicle is parked. This allows the vehicle to “breathe”
through the outside air inlet duct.

OFF

Controls and features

30

Advertising
This manual is related to the following products: