FORD 2000 F-150 - Manual (Page 130)

• F150 King Ranch
1. Position the child safety seat on the passenger seat cushion.
2. Route the child safety seat tether strap over the back of the seat.
3. Locate the correct anchor for the selected seating position.
• You may need to pull the seatback forward to access the tether
anchors. Make sure the seat is locked in the upright position before
installing the child seat. Refer to the Folding Down The Rear Seats
section in this chapter for information on how to operate the rear
seats.
4. Clip the tether strap to the anchor as shown.
Seating and safety restraints
130