Controls and features – FORD 2000 Taurus User Manual

Page 26

Advertising
background image

• MAX A/C-Uses recirculated air to cool the vehicle. The temperature

will remain unchanged and air will be cooled based on the selected
temperature. To exit, press AUTOMATIC or any other override
controls. MAX A/C is noisier than normal A/C but more economical
and will cool the inside of the vehicle faster. Airflow is from the
instrument panel registers. This mode can also be used to prevent
undesirable odors from entering the vehicle.

• OFF-Outside air is shut out and the fan will not operate. For short

periods of time only, use this mode to reduce undesirable odors from
entering the vehicle.

Displaying outside temperature

Press OUTSIDE TEMP to display
the outside air temperature. It will
be displayed until OUTSIDE TEMP
is pressed again or until any other
control is pressed. When the EATC
system is off and OUTSIDE TEMP is
pressed, the outside temperature
will only be displayed for four
seconds.

The outside temperature reading is most accurate when the vehicle is
moving. Higher readings may be obtained when the vehicle is not
moving. The readings that you get may not agree with temperatures
given on the radio due to differences in vehicle and station locations.

Operating tips

• In humid weather, select F

before driving. This will reduce

fogging on your windshield. After a few minutes, select any desired
position.

• To prevent humidity buildup inside the vehicle, don’t drive with the

climate control system in the OFF position.

• Don’t put objects under the front seat that will interfere with the

airflow to the back seats.

AUTO

TEMP

OFF

TEMP

MAX

A/C

OUTSIDE

Controls and features

26

Advertising