Maintenance and care – FORD 1998 Taurus User Manual

Page 143

Advertising
background image

2. Park the vehicle on a level surface and engage the
parking brake.

3. With the parking brake engaged and your foot on
the brake pedal, start the engine and move the
gearshift lever through all of the gear ranges. Allow
sufficient time for each gear to engage.

4. Latch the gearshift lever in P (Park) and leave the
engine running.

5. Remove the dipstick, wiping it clean with a clean,
dry lint free rag.

6. Install the dipstick making sure it is fully seated in
the filler tube.

7. Remove the dipstick and inspect the fluid level.
The fluid should be in the designated areas for
normal and room temperature.

Low fluid level

Do not drive the
vehicle if the fluid level
is at the bottom of the
dipstick and the outside temperatures are above
10°C (50°F).

Correct fluid level

The transmission fluid should be checked at normal
operating temperatures 66°C-77°C (150°F-170°F) on
a level surface. The normal operating temperature
can be reached after approximately 30 km (20
miles) of driving.

The transmission fluid
should be in this range
if at normal operating
temperature (66°C-77°C [150°F-170°F]).

DON’T ADD IF IN CROSSHATCH AREA--CHECH WHEN HOT-IDLING

DON’T ADD IF IN CROSSHATCH AREA--CHECH WHEN HOT-IDLING

Maintenance and care

143

Advertising