Hella Rallye 3000 Compact User Manual

Page 13

Advertising
background image

460 719-07 3000.comp 11.04.2005 12:36 Uhr Seite 13

13

Install the relay with the
connection terminals
facing downwards and
splash-proof. If required
and permitted by legal

regulations, install a
switch on the dashboard.
Disconnect the battery
ground cable (-) for
safety reasons.
Route and connect the
cables according to the
circuit diagram. When
wired according to circuit

diagram

I

the auxiliary

lamps are switched on
together with the existing
driving lamps. According
to circuit diagram

II

the

auxiliary lamps are switched
in addition to the existing
headlamps via a separate
switch. According to circuit

diagram

III

the CELIS®

position lamps are
connected and switched
on together with the
parking light. Reconnect
the battery ground cables.
Test the lighting system.
Fasten the supply cables
securely in place.

Have the driving lamps
set by a specialist garage

or at a service station.
Only correctly set

headlamps ensure
optimum light.

Another tip:

• Always keep headlamp

lenses clean. Dirt can
swallow up to 80% of
light power. You drive
safely when you can
see and be seen well.
Do you carry spare

bulbs and fuses in
your vehicle?

• If you have any

questions or installation
problems: Call Hella
Customer Services:

• Outside normal working

hours an answering
machine will record your
inquiries and requests
and Customer Services
will then get back to you.
Ask your dealer for the
complete Hella brochure
or write to:

Hella KGaA
Hueck & Co.
59552
Lippstadt/Germany

Electrical
connection, page 4

Advertising