Jeppesen INDS Data Manager for Windows - Manual (Page 8)

8
2. Drop the service to start the download process. When the download is complete, the
status on the service will be Downloaded. Ready to program (offline).
Offline
3. When ready, select the service that has been downloaded. Drag and drop the service
on the USB drive in the Update Options Area.
4. You will receive pop-up messages in the upper right corner with status information.
5. When the programming process has successfully completed, a message will display with
a link to View Alerts and notices. Click on this link to get the latest information on your
services prior to flight.
6. Be sure to use the eject function (the up arrow icon) before removing the USB drive from
the computer.
WARNING Do not remove your media until the programming cycle is complete. Otherwise,
data may be incomplete or corrupt.
Programming to a CD Drive
IDM allows you to program your data directly to a CD. The media supported by IDM are CD-R
(blank only) and CD-RW (blank or formatted) discs. When inserting a blank disc, you will get a
pop-up message from Windows offering blank CD options. Please disregard this message.
IDM will format the disc for you.
1. Insert a CD into the computer. If the CD is a valid* drop target, it will be displayed in the
Update Options area of the application. If the CD is blank, IDM will format it to CDFS in
order to be read by the DMU.