Jeppesen FliteStar - Manual (Page 3)

FliteStar Quick Start Guide _____ May 2009
3
Saving a RoutePack
Save your RoutePacks the same as you would any other file by selecting the RoutePack in the
RoutePack List and doing one of the following:
• Click File > Save.
• Click the Save button in the Standard toolbar.
• Press CTRL+S.
Choose Yes if you are prompted to save a RoutePack on exit.
You can also save a RoutePack file under a different name by right-clicking the RoutePack from the
RoutePack List and choosing Save As.
The following are possible default location of where the RoutePacks are stored depending on your
setup and operating system:
• C:\Users\[User Profile]\Jeppesen\Common\RoutePack (Windows Vista)
• C:\Program Files\Jeppesen\Common\RoutePack (Windows 2000 and XP)
• C:\Jeppesen\Common\RoutePack (Windows 2000 and XP)
If you installed FliteStar in a folder other than the default path, the default RoutePack folder also
changes. Regardless of where the program is installed, you may choose to save RoutePacks in a
different folder, such as My Documents. You need to know where these files are saved if you want to
copy them to another machine.
Unloading a RoutePack
After you load a RoutePack in FliteStar, it stays there until you unload it, even if you exit and reenter the
program. When you load a RoutePack, any currently-loaded RoutePacks stay in the RoutePack List in
addition to the newly-loaded RoutePack.
To unload a RoutePack, select the RoutePack name on the RoutePack List and click File > Unload.
Opening a RoutePack
After you have unloaded a RoutePack, you can access them by clicking File > Load. Browse and select
a RoutePack from the default folder or from the location you designated.