Kraus FUS-1011 - Manual

Dear Valued Customer,
Kraus would like to take this opportunity
to thank you for purchasing Kraus
products. It is our sincere hope that you
are completely satisfied with your new
purchase. We welcome any questions or
comments you may have, and look
forward to assisting you in the future.
Sincerely,
Kraus Customer Service Department.
Contact Us Toll-Free at 1-800-775-0703; or visit our website at www.kraususa.com. © 2008-2009 Kraus USA Inc. Contact Us Toll-Free at 1-800-775-0703; or visit our website at www.kraususa.com. © 2008-2009 Kraus USA Inc.
Adjustable wrench Pipe tape Groove joint plier Phillips screwdriver If you've followed the instructions carefully and your faucet still does not work properly, take these corrective steps.
Problem Cause Action
Before Your Installation
Tools You Will Need
Check to make sure you have the following parts indicated below:
Leakage under the handle. Adjusting ring or cap has come loose. Tighten the adjusting ring or cap.
Aerator leaks or has an inconsistent
water flow pattern.
Aerator is dirty or misfitted. Unscrew the aerator to check rubber packing
or replace the aerator.
Water will not shut off completely.
MAINTENANCE
Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these
will dull the finish and void your warranty.
MAINTENANCE
Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these
will dull the finish and void your warranty.
Faucet Installation Procedure
Pop-Up Drain Installation
Shut off main water supply before installation.
Model
FUS-1011CH
FUS-1011SN
FUS-1011ORB
Hex wrench
Dirty or worn out plastic washer in the
cartridge.
Remove the handle and the cartridge to check if the ceramic
dish is dirty or permanently damaged.
Trouble - Shooting
Keep this manual for ordering replacement parts.
Replacement Parts
Silicone Sealant
The fittings should be installed by a licensed plumber.
KRAUS is proud to offer its customers the strongest, most durable
c e r a m i c c a r t r i d g e s i n a l l s o l i d b r a s s K i t c h e n F a u c e t s i t
manufactures. KRAUS guarantees all of our products to be free of
defect in materials and craftsmanship. All KRAUS BRAND Kitchen
Faucets carry a limited lifetime warranty from the original date of
purchase.
If a product fails due to defect in material or craftsmanship during
the warranty period, KRAUS will repair or replace the items at our
sole discretion. Warranty does not apply when the item has been
tampered with, misused, improperly installed, altered, or damaged
due to abuse or accident. Proof of purchase (original sales receipt)
must be provided to KRAUS for all warranty claims. Please contact
one of our representatives if you need any additional details. All KRAUS products must be installed by a licensed professional
plumber or contractor to avoid any improper use or installation.
IN NO EVENT SHALL KRAUS BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES, INSTALLATION
COST, LABOR, TRAVEL TIME, FREIGHT COSTS INCURRED, LOST
PROFITS, OR CONTINGENT LIABILITIES.
KRAUS USA Inc. makes no representation that its products
comply with any or all local building or plumbing codes. It is the
consumer’s responsibility to determine local code compliance.
This warranty extends to the original purchaser and first
consumer.
2 1 3 Remove the mounting hardware
from the faucet.
The cover plate is optional, you may
determine whether you need to install it
or not.
4 5 After installing faucet, remove aerator and
turn on water to remove any debris.
Re-assemble aerator.
SAFETY TIPS
• Cover your drain to avoid losing parts
• When installing flexible hose, Please notice: there should be no torsion or deformation ; do not fold into
Shape V or L; do not use if there is any crack or deformation.
1.
2.
3.
4.
5. 9.
12.
13.
14.
15.
8.
11.
10.
7.
6.
Attach rubber washer and metal washer
on supply hose. Screw metal threaded
rods onto faucet body. Tighten the nut
on metal threaded rods.
Slip coupling nut onto inlet port.
KRAUS” Brand Kitchen Faucets Limited Lifetime Warranty
Single Handle
Lav Faucet
AB1953 Compliant
1 Index Button
2 Metal Handle
3 Trim Cap
4 Locking Nut
5 Ceramic Disc Cartridge
6 Aerator
7
Base Trim Ring
8 Mounting Hardware Assembly
9 Cover Plate & Putty Plate
10 Lift Rod
11 Pop-up Assembly
12 Supply Hose
13 Wrench
14 Wrench
15 Wrench (H2.5 * 19 mm L * 53mmL)
Lift rod
Drain assembly
Lift rod strap
Ball rod
Main plunger
Lock nut
1
6
5
4
2
3
1. Remove old pop-up drain assembly.
6. With the ball rod all the way down, push the tip of the ball rod
through the lift rod strap (2) until it is aligned with the lift rod.
2. 3.
4. 5.
Place a ring of silicone sealant around drain opening of sink.
Insert threaded drain body down through drain hole.
Place lift rod through the faucet. From below the sink, place the lift rod
strap (2) onto the end of the lift rod by pulling out on the knob and
pushing the rod into place. Release knob.
Thread lock nut from underside of sink until rubber washer sits securely
inside opening of sink. Tighten lock nut.
Insert main plunger into drain with the long side toward
the ball rod opening. Insert ball rod (3) into the hole in
the main plunger. Turn ball rod nut1/4 turn to lock in place.
Note: Please do not use plumbers putty on plastic
components.