Clarion VMA8582 - Manual (Page 12)

12
VMA8582 (U)
English
Owner
’s Manual
Dimmer
In case of auto mode
The factory default setting is auto mode.
This mode adjusts the screen brightness automatically according to the ambient brightness.
1. Press the MENU button.
Confirm that “AUTOMATIC DIMMER” is se-
lected.
DOWN/UP SELECT MENU
AU TO M AT I C D I M M E R
D I M M E R S E L E C T
I N P U T S E L E C T
P I C T U R E M E N U
E N D
2. Press the MENU button again.
The auto dimmer (dark level) display appears.
3. Adjust the screen brightness using the ▼ and
▲ buttons so that you can see the screen with
great ease at night time. (-60 to
±
0)
Notes:
• When the menu screen is displayed and “END”
is selected in step 1 or a further operation is
not performed for 10 seconds, the menu dis-
play disappears automatically.
• If you adjust the screen brightness so that the
screen can be seen with great ease at night-
time, the screen brightness will be adjusted
automatically from the maximum luminance to
the minimum luminance (the brightness at
which the screen can be seen with great ease
at nighttime).
(It is recommended to set the AUTOMATIC
DIMMER level at -40 to -60.)
• If you set the AUTOMATIC DIMMER level to
±
0, the screen brightness level will be fixed to
the maximum luminance and the screen bright-
ness will not change.
POWER FUNC WIDE MENU
– 5 5
AU TO M AT I C D I M M E R
– 5 5
AU TO M AT I C D I M M E R
If you set the AUTOMATIC DIMMER level to
±
0,
the screen brightness does not change.