4chapter 1 knowing the parts – Compaq Bluetooth Headset User Manual
Page 12
Component
Description
(1)
Power light
●
On: The computer is on.
●
Blinking: The computer is in Sleep.
●
Off: The computer is off or in Hibernation.
(2)
Power switch
●
When the computer is off, slide the switch to turn
on the computer.
●
When the computer is on, briefly slide the switch
to initiate Hibernation.
●
When the computer is in Sleep, briefly slide the
switch to exit Sleep.
●
When the computer is in Hibernation, briefly
slide the switch to exit Hibernation.
If the computer has stopped responding and
Windows shutdown procedures are ineffective, slide
and hold the power switch for at least 5 seconds to
turn off the computer.
To learn more about your power settings, select
Start > Control Panel > System and Security >
Power Options.
(3)
Drive light
Blinking: The hard drive or flash drive is being
accessed.
(4)
Battery light
●
On: A battery is charging.
●
Blinking: A battery that is the only available
power source has reached a low battery level.
When the battery reaches a critical battery level,
the battery light begins blinking rapidly.
●
Off: If the computer is plugged into an external
power source, the light turns off when all
batteries in the computer are fully charged. If the
computer is not plugged into an external power
source, the light stays off until the battery
reaches a low battery level.
(5)
Wireless light
●
Blue: An integrated wireless device, such as a
wireless local area network (WLAN) device and/
or a Bluetooth® device, is on.
●
Amber: All wireless devices are off.
(6)
Wireless switch
Turns the wireless feature on or off, but does not
establish a wireless connection.
NOTE:
A wireless network must be set up in order
to establish a wireless connection.
4
Chapter 1 Knowing the parts