Dodge 2009 Nitro - Quick Reference Guide - Manual (Page 10)

sPeeD Control lever
CRUiSE ON/OFF
• Push the ON/Off button to activate the Speed Control.
• CRUISE will appear on the instrument cluster to indicate the
Speed Control is on.
• Push the ON/Off button a second time to turn the system off.
SET
• With Speed Control on, press down and release the lever to set a
desired speed.
ACCEL/DECEL
• Press and hold the lever up to accelerate or down to decelerate
the vehicle; release the lever to save the new set speed.
• Once a speed is set, tapping the lever up or down will increase
or decrease the set speed approximately 1 mph (2 km/h).
CANCEL
• Pull the lever toward you, or apply the brakes to cancel the set
speed and maintain the set speed memory.
• Push the ON/Off button to turn the system off and erase the set
speed memory.
RESUME
• To resume a previously selected set speed in memory, push the lever
up and release.
Push on/off
Button
175468_09_DodgeNitroQRG_111308.indd 11 4/24/09 1:16:56 PM