License lamp – Dodge 2010 Challenger - Owner Manual User Manual
Page 422
Advertising
![background image](/manuals/603163/422/background.png)
License Lamp
1. Remove the screws securing the lamp to the rear
fascia.
2. Remove the bulb and socket assembly.
3. Disconnect the bulb from the socket assembly and
install the replacement bulb.
4. Reinstall the bulb and socket assembly.
5. Reattach the lamp to the rear fascia, and then install
the screws.
1 — License Lamp Bulb
2 — Socket
420
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: