Chrysler Uconnect for Jeep - Manual (Page 54)

3. Touch the 1 soft-key and then touch either AUX 1 or
AUX 2 in the VES column (depending which AUX input
is used). To exit press the back arrow soft-key at the top
of the screen. Listen to an Audio Source on Channel 2 while a
Video is playing on Channel 1
Ensure the Remote Control and Headphone switch is on
Channel 2.
Using the Remote Control
1. Press the MODE button on the Remote Control and
the Mode Select Screen will display, unless a video is
playing then only a small banner will appear on the
bottom of the screen.
2. While looking at the video screen, either press Up/
Down/Left/Right on the Remote Control to highlight the
desired audio source or repeatedly press the MODE
button on the remote until the desired audio source
appears on the screen.
Select Channel/Screen 1 and AUX 1 in the Ves column.
3
Uconnect™ Multimedia - Video Entertainment System (VES)™ 53