Ram Trucks uconnect 8.4AN for Chrysler - Manual (Page 384)

• 3D (3D Map View Is Only Available On Uconnect
8.4AN. Must Select 3D City Models Or 3D Landmarks
For 3D Map View To Display.)
• 2D
Orientation
Press this button on the touchscreen to change how the
Map Orientation is displayed. Press the desired button on
the touchscreen.
• North Up
• Heading Up
Current Street
Press this button on the touchscreen to turn on/off the
current street display on the lower center of the Map
View. Press and release the button on the touchscreen
until a check-mark appears, showing the setting has been
selected.
Destination Information
Press this button on the touchscreen to change the
Destination Information that is displayed in the upper
right corner of the Map View. Press the desired button on
the touchscreen.
• Time of Arrival
• Time to Destination
• Distance
AutoZoom
Press this button on the touchscreen to change how the
AutoZoom feature adjust the zoom level during guid-
ance in Map View. Press the desired button on the
touchscreen.
• Far
• Normal
4
Uconnect® 8.4AN — If Equipped 383