Dodge 2015 Challenger - User Guide - Manual (Page 28)

To remove the head restraint, remove the seat belt from the seat belt loop. Raise the head
restraint as far as it can go then push the adjustment button and the release button at the
base of each post while pulling the head restraint up. To reinstall the head restraint, put
the head restraint posts into the holes while pushing the adjustment button and release
button. Then adjust it to the appropriate height.
WARNING!
• A loose head restraint thrown forward in a collision or hard stop could cause serious
injury or death to occupants of the vehicle. Always securely stow removed head
restraints in a location outside the occupant compartment.
• ALL the head restraints MUST be reinstalled in the vehicle to properly protect the
occupants. Follow the re-installation instructions above prior to operating the
vehicle or occupying a seat.
• Do not place items over the top of the Active Head Restraint, such as coats, seat
covers or portable DVD players. These items may interfere with the operation of the
Reactive Head Restraint in the event of a collision and could result in serious injury
or death.
FRONT SEATS
Power Seats
• The power seat switches are located on
the outboard side of the front seat cush-
ions.
• The seat switch, controls forward/
backward and up/down.
Power Seat Switch
G E T T I N G S T A R T E D
26