Cop y, Hauto exposure bracketing (aeb) – Canon EOS 1D User Manual
Page 114
114
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±3 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
1
Hold down the <W> and
<o> buttons
simultaneously.
(9)
X
The <h> icon and “0.0” will appear
on the top LCD panel.
2
Set the AEB amount.
Turn the <6/5> dial to set the
AEB amount.
“1.0” is the AEB increment, and <N>
is the AEB amount.
3
Take the picture.
In the current drive mode, the pictures
will be taken in this sequence:
Standard exposure, decreased
exposure, and increased exposure.
After the three bracketed shots are taken,
AEB will not be canceled. To cancel AEB,
set the AEB increment to “0.0”.
h
Auto Exposure Bracketing (AEB)
Standard
exposure
Decreased
exposure
Increased
exposure
During AEB shooting, the <w> icon in the viewfinder and the <h> icon
on the top LCD panel will blink.
The AEB setting will be canceled automatically if the power switch is set
to <2> or if the flash is ready.
AEB will not work with bulb exposures nor with flash.
If the drive mode is set to <u> or <6>, you must press the shutter button
three times. If <o> or <p> is set and you hold down the shutter
button completely, the three bracketed shots will be taken continuously.
Then the camera will stop shooting. When <k> or <l> is set, the three
bracketed shots will be taken continuously after a 10-sec. or 2-sec. delay.
AEB can also be combined with exposure compensation.
COP
Y