COBY TF-TV4217 - Manual (Page 9)

Fun ti n
AV Function
The player’s AV function consists of the AV IN function and the AV OUT function. You can not only
enjoy programs from external input sources through the AV IN function but can also transmit the
player’s signal to the external monitor using the AV OUT function.
1. Connect the external AV signal source or monitor. Refer to the “Cable Connection” section for
details
2. Press the MODE button to select the relevant mode (AV1, AV2, S-Video, Component, HDMI1,
HDMI2)
NOTE: The AV OUT function is only available for the AV1, AV2, S-Video mode.
AV Setup Menu
Various features can be preset through the AV menu.
Press the MENU button to display the AV menu.
AV setup menu consists of PICTURE, AUDIO, TIME, SETUP as well as LOCK.
Press the left/right direction button to select the desired sub-menu, press OK to enter.
The LOCK setup menu is only available for the AV1, AV2 and S-Video mode.
While working with the menu
1. Press the up/down direction buttons to select the desired item.
2. Press the left/right direction button to adjust.
3. Press MENU to exit/return to the previous menu.
PC Function
PC Function
You can use the unit’s TFT LCD as your computer’s monitor.
1. Shut down both the unit and the computer. Connect the VGA jack and PC Audio In jack. See the
“Cable Connection” section.
2. Turn on the units and the computer. Press the MODE button to select VGA
PC Setup Menu
Various features can be preset through the PC menu.
Press the MENU button to display the PC menu.
PC setup menu consists of PICTURE, AUDIO, TIME as well as SETUP.
Press the left/right direction button to select the desired sub-menu, press OK to enter.
While working with the menu
1. Press the up/down direction buttons to select the desired item.
2. Press the left/right direction button to adjust.
3. Press MENU to exit/return to the previous menu.
Adjust the PC Screen
Upon switching to the PC mode, the moniter will be automatically regulated for a
proper functioning. If the result is not up to your expectation, please perform the
following steps to adjust the screen manually .
1. Enter the “Advanced” sub-menu from the SETUP menu.
Select “Auto” and press the left/right direction button to adjust the
monitor automatically.
2. Or if you still have problem with the monitor after, adjust “H-Pos”, “V-Pos”,
”Clock“ as well as “Phase” accordingly under the SETUP menu.
NOTE: Please see the TV section for the menu descriptions
NOTE: Please see the TV section for the menu descriptions
Fun ti n
14
AV Function
Fun ti n
15
PC Function