Casio G'zOne Rock - Manual (Page 65)

64
Push to T
alk
6. When the called party finishes speaking, you will hear the “Floor
Available” tone and the “Connected to” screen will appear on your
display.
7. Press and hold the Top Side Key/PTT Key  to talk.
8. Release the Top Side Key/PTT Key  to let the other party talk.
9. Press the End/Power Key to end the call.
Calling from Temp PTT Group (Barge)
1. From idle mode, press the Top Side Key/PTT Key  to access
your PTT Contact List.
2. Press the Right Soft Key [Options], then press  Temp PTT
Group.
3. Press and hold the Top Side Key/PTT Key . Wait until the “OK
to Talk” tone sounds and the message “Talking to” appears on the
display. Speak while holding the Top Side Key/PTT Key .
4. Release the Top Side Key/PTT Key  to let the other party talk.
5. Press the End/Power Key to end the call.
Calling from Keypad (Barge)
1. From idle mode, enter the 10-digit phone number of the Verizon
Wireless PTT subscriber you wish to contact.
2. Press and hold the Top Side Key/PTT Key . Wait until the “OK
to Talk” tone sounds and the message “Talking to” appears on the
display. Speak while holding the Top Side Key/PTT Key .
If the phone number you entered has already been registered in
your PTT Contact List, the contact name will replace the phone
number entered on the display when you initiate the call by
pressing the Top Side Key/PTT Key .
3. Release the Top Side Key/PTT Key  to let the other party talk.
4. Press the End/Power Key to end the call.